IR 2000UL: IrDA-USB FIR Computer Adapter

The ACT-IR2000UL IrDA USB adapter provides a bridge to the USB port of a desktop PC, allowing high speed 4M bps wireless data transfer for record synchronization, file back-up and network access. No external power is needed!

The ACT-IR2000UL adapter is compatible with Windows 98, ME, 2000, Win XP, Vista and Win 7/8 (32 & 64 bit). The IR2000UL is bundled with the Windows driver, which allows wireless data communication from laptop, PDA, digital camera, cellular phone, data terminal, mobile medical units and other portable devices to a PC with plug-and-play simplicity.

The ACT-IR2000UL is fully compliant to USB specification 1.1,data rates of 12Mbps and IrDA specification 1.3,  data rates of 9.6, 19.2, 38.4, 57.6, 115.2Kbps and 4Mbps. It can reach a communication distance of 1 ~ 158cm (SIR) or 1 ~ 100 cm (4 Mbps),  it is bus-powered device and no external power supply needed.

The ACT-IR2000UL does not occupy PC's COM or Parallel port and has no complicated hardware resource setting and conflict, such as IO address / IRQ / DMA numbers. It is PNP (Plug And Play) device and its installation is much simpler than any other IR adapters.

The ACT-IR2000UL shows full interoperability of USB devices and can work together with hundreds of other USB devices on the same PC if you have enough USB hubs. You can unplug it at any time if you have no enough USB ports on your PC and need connecting other USB device temporarily. You need not remove and reinstall its driver for it.

For Windows 10(32-&64-bit) OS support:
Please contact ACTiSYS’ T-S team by an email, tech-support@actisys.com, for Windows 10, 32-&64-bit OS workaround solution. If it’s good enough for you in terms of, one way communication (able to download data from IR device to PC, not able to upload/configure IR device from PC), and equal or acceptable throughput under Windows 10 OS than previous editions of Windows OS, then you can continue to use it. Many of our others customers did extensive tests and indicating that,
i) It works only in one way, able to download data from IR device to PC, not able to upload/configure IR device from PC.
ii) Throughput is 7X slower under Windows 10 OS than previous editions of Windows 8.1/8&7 OS. Those customers are using our ready and popular solution, ACT-IR100UDv3-XX, intelligent customized USB to IrDA SIR Adapter.
ACT-IR100UDv3-XX URL: http://www.actisys.com/flyer/ACT-IR100UD-v2_v3-Flyer-v1.0.4-150923.pdf

ACT-IR2000UL:

• Infra-Red Wireless USB Interface Adapter. 
• IR head can be easily attached to any convenient desktop location using Velcro.
• Ruggedized version, IR2000UR is also available.
• The ACT-IR2000UL bundles with easy, 1-step Windows 98/ME/2000, Win XP, Vista & Win 7/8 driver. It comes in two cable lengths: IR2000UL (120cm or 4 ft cable) for desktop PC and IR2000UL-S (10cm or 4" short cable) for notebook.

Specifications:

SUB-CARRIER/IR INTERFACE:

Compatible with the following IR or IrDA capable devices:

Notebook:	Software:	Handheld PC/PDA:
All notebook's  with USB connector	Windows Vista/Win 7/8 (32 & 64 bit) Windows XP (32 & 64 bit) Windows 2000 Windows ME Windows 98 Win 95 & Win NT4.0 Not compatible	Psion 3C/Series 5  Palm Pilot III, V, & VII  All Windows CE 2.0-H/PC
Printer:	Cellphone:	Digital Camera:
HP-5MP Laser Printer  HP-6P Laser Printer  Others	Nokia 9000, 9000i, 8000, 7110  Ericsson SH888 / SF888  Alcatel, Sharp PMC  Nokia 2xxx series are not compatible	Sony DSC-F1  Sharp VE-LS5  Kodak  Others

Desktop:

All desktop PC's with USB connector