|
IR 3200M: Hand-held
IrDA-1.1 (9.6K-4M bps) System Tester
Each ACT-IR3200M replaces the
following: desktop PC, FIR add-on card and serial adapter, to test
FIR/MIR/SIR of various IrDA DUT (Device Under Test).
Pocket size, battery operated, optional AC adapter. Test
status and results
indicated by LED's or audio.
Connecting IR3200M to the
notebook PC Com port, facing the FIR window, you can now test the FIR
function of notebook in a simple loop test! This quick loop test was
possible only with SIR before!
Using
one IR3200M, you can easily test
IrDA-enabled digital camera, PDA, smart cell phone, pager, data terminal,
printer, etc.
Using IR3200M and a fixture driven by
the second IR3200M, you can easily replace and test many IrDA transceiver
modules! This was not possible before!
One
button operation to test both IrDA hardware and default IrDA protocol
driver which consists of:
- Media busy condition.
- Discovery procedure.
- Connections at all the data rates
supported.
- IAS inquiries of DeviceName and
IrLMPSupport.
- Verify Test Frames if the DUT-IrLAP supports it.
- Disconnect, go back to Normal Contention Mode and
connect at the next supported data rate, make IAS inquiries, exchange test
frames, etc.
- Customized IrDA test program can be stored in a flash ROM inside. It can
be programmed by connecting IR3200M to the Com port of desktop PC, or can
also be controlled and test progress displayed on PC,
interactively!
Also
available separately from ACTiSYS: Testing Embedded DUT?
- PC software to configure and customize IrDA test
program.
- PC software to control IR3200M
interactively.
- FIR Driver support for many IrDA notebook
models.
- Simplified IrDA stacks for many other device
types.
|
|
|
Specifications
ACT-IR3200M
HANDHELD TESTER SIR/MIR/FIR
PHYSICAL LAYER:
- IrDA-1.1/1.0 (FIR/MIR/SIR)
compatible.
COMMUNICATION DISTANCE &
SPEEDS:
- Communication speeds
programmable at 9.6, 19.2, 38.4, 57.6, 115.2 Kbps for IrDA-1.0 mode, and 9.6K
to 4M bps for IrDA-1.1 mode. It can reach distance of 0cm to 100cm.
CONNECTORS:
-An USB type B connector
POWER SOURCE:
- 4 x AA battery or AC adapter
(Optional)
POWER CONSUMPTION:
- Active: 158 mA (521.4 mW) ;
Sleep: 84 mA (277.2 mW) ; Power down: 11uA (36.3 uW)
DIMENSIONS/WEIGHT:
- 2.0"L x 1.63"W x
0.63"H (51mm x 41mm x 16mm) / 6.6 oz.; 175gr.(with batteries)
OPTIONAL:
- PC software to
configure and customize IrDA test.
- PC software to control
IR3200M interactively.
- FIR Driver support for many
IrDA notebook models.
- Simplified IrDA stacks for
many other device types.
Compatible with the
following IR or IrDA capable devices:
| Notebook: |
Software: |
Handheld
PC/PDA: |
| All
notebook PC's |
Windows
95-IR driver 2.0
Windows 98, NT 5.0-IR
driver 3.0
Windows CE 2.0
Puma-Tranxit pro
|
Norand,
LXE, 3 COM Palm Pilot III
Sharp Zaurus, Power
Zaurus, HHP
TELXON, Symbol, Psion
Series 5
All Windows CE2.0-H/PC
|
| Printer: |
Cell phone: |
Digital
Camera: |
| HP-5MP
Laser Printer
HP-6P Laser Printer
|
Nokia
9000, 6000 series
Motorola Page Writer
2000
|
Sony
DSC-F1
Sharp VE-LS5
|
|
