Search by:

ACT-IR100SD / IR100SDi / IR100S / IR100Si / IR8200IC
Instantly Convert RS232 Cable to IR, Without Special IR SW!




-- Description --

Intelligent SIR RS232 Adapter, ACT-IR100SD/ IR100SDi

-Supports mandatory IrDA layer: IrPHY, IrLAP, IrLMP and IAS.

-Supports upper layers TinyTP, IrCOMM, IrLPT, and OBEX transport.

-Supports host baud rate from 1.2 kbps to 115.2 kbps, which is changed by PC utility; IrDA baud rate from 9.6 kbps to 115.2 kbps, which is flexible, setting by IrDA devices

-Supports both IrDA Primary and Secondary mode, changing mode via a PC utility

-No driver software is needed.

-IR frame and Host buffer are 2048 bytes separately.

-Supply voltage 6.0 V to 12V

-Power consumption: 20mA standby, 50mA active.

-Supports 3 wires host interface (Tx, Rx and GND).

-Interface to Host:
  • Full-duplex asynchronous serial (TXD, RXD)
  • Hardware flow control (RTS, CTS)
  • Optional line status for link control (DTR, DSR)
  • Other unused inputs (RI, CD)

-Internal PCBA available (Model # ACT-IR100SDi)

Ready RS232 External Intelligent SIR Adapter, ACT-IR100S

-Connects to and turns your RS232 port instantly into IrDA ready, no SW change!

-Works with any RS232 port of modem, printer, instrument, meter, data terminal.

-Fully compatible with IrDA Physical and Protocol spec: IrLAP, IrLMP, IrCOMM.

-IR speeds at 9.6K, 19.2K, 38.4K, 57.6K, 115.2K bps.

-Active power: 100mA, standby: 10mA, auto-sleep/IR wake-up feature.

-Uses AC adapter or external DC power connected to pin 1 or 9 of DB9F

-61mmLx35mmWx 18mmH (2.4"Lx1.4"Wx 0.7"H), 65 gr (2.5 Oz)


Ready Serial Internal Intelligent SIR Adapter, ACT-IR100Si


-Same as ACT-IR100S except without plastic enclosure, cable, AC adapter.

-Guaranteed full IrDA-1.0 Physical and Protocol spec. compliant.

-Can be placed inside your product as daughter board facing front panel.

-Can be designed to be either RS232 or TTL compatible.

-Easy, quick, low cost and guaranteed IrDA certification!

-The IR100Si has the most reliable IrDA code and is compatible with most IrDA device, all categories. Examples include Smart Cellular phones.

-OEM model, sold only to IR100S customer.

Ready SIR Protocol Processor, ACT-IR8200IC

-Use the same low-power microprocessor as in ACT-IR100S, IR100Si.

-IrDA-1.0 compliant protocol stack built on chip, IrLAP, IrLMP, IAS, IrCOMM.

-SIR controller IC and reference circuit available.

-No change of your RS232 application or protocol SW, instant IrDA ready.


[ Home Page | About ACTiSYS | Contact us | IrDA Products | Tutorials | IrDA Test Center | Compatibility |
Order | Price Quote | Technical Support | Downloads | Track a Package | Jobs | Feedback | Privacy | Terms ]

ACTiSYS CORP.  | 921 Corporate Way | Fremont, CA 94539
Tel: +1-510-490-8024 | Fax: +1-510-623-7268
  irda-info@actisys.com

© 1996-2019 ACTiSYS Corporation,
All Rights Reserved